Video: How to Mount Coyote Saddlebag + MoJavi Saddlebag on Late Model KTM, Husqvarna Fenders

By October 4, 2015January 21st, 2016FAQ, Fitment, Husqvarna, KTM, Saddlebags, Snow, Tech Tips, Video

Here’s how to use the loop of our custom-woven Ballistic nylon (included with Giant Loop’s Coyote Saddlebag and MoJavi Saddlebag) instead of the Fender Hooks to anchor the bag to the rear fender. Simply loosen the bolts holding the two halves of the rear fender together enough to thread the webbing between the upper fender and the under-fender support. Check webbing positioning: Saddlebag should sit right behind seat when side anchor straps are tensioned. Retighten bolts to sandwich webbing between fender components, positioned to anchor Saddlebag behind rear seat when side straps are tight. Thread webbing through underside of Saddlebag in pass through thumb-lock buckles – push the stiff webbing through and pull to tight to finish. When Saddlebag is not on bike, use buckle, wire tie or other simple method to prevent loose webbing ends from dangling into hot exhaust. Go light, go fast, go far!