Tech Tip: Siskiyou Panniers on KTM 1190 Adventure R – Rackless Mount

By August 19, 2014January 29th, 2016FAQ, KTM, Tech Tips, Uncategorized

Siskiyou Panniers on KTM 1190 and BMW F800I just chased Brad Tawzer, the owner of this bike, through sand whoops, rocky washes and tight twisty rocky jeep trails, and I’m absolutely blown away by how stable and solid the Siskiyou Panniers ride on the KTM 1190 Adventure R. NO RACK REQUIRED! Let’s take a look at his tight and tidy install:

KTM 1190 Adventure w Siskiyou Panniers - rearview

STEP 1: Remove passenger handles and insert spacers to secure tail rack. Tawzer cut his spacers from lengths of steel pipe, but many hardware stores will have an assortment of ready-made spacers, too.

By removing the large passenger grab handles on the KTM 1190 Adventure R and installing spacers in their place to secure the tail rack, the Siskiyou Panniers sit in the optimal postition – panniers lids level with the top of the seat, not drooping over the sides. The cross-over section on the Siskiyou Panniers is adjusted to its minimum width.

Tillamook Dry Bag, Siskiyou Panniers on KTM 1190

STEP 2: Mount Siskiyou Panniers per the provided instructions, securing side anchor straps to passenger footrest mounts and the tail of the panniers to the stock rack. We like to use 16″ Pronghorn Straps to make mounting easier and faster.

The Siskiyou Panniers mount in the usual way, per GL’s instructions included with the Panniers: The two side anchor straps secure to the passenger footrest mounts, and two anchor straps attach the D-rings on tail of the Panniers to the stock tail rack. We like to use 16″ Pronghorn Straps as our anchors, as they are quick, easy and super secure. Now, here’s the best part .. . .

Siskiyou Panniers' daisy chain attached to KTM 1190's stock luggage mount

STEP 3: Using 16″ Pronghorn Straps, secure Siskiyou Panniers’ wheel-side daisy chains to the stock KTM luggage mounts on both sides.

By securing the Siskiyou Panniers’ wheel-side daisy chains to the stock KTM luggage mounts and drawing forward tension with the side anchor straps, the Panniers become solidly locked into position. Supported by the stock luggage mounts in multiple locations.

KTM stock luggage mounts support Siskiyou Panniers

KTM’s stock luggage mounts support the Siskiyou Panniers in multiple locations, making the installation dead-solid stable on the bike.

If you’re a belt-and-suspenders rider, then add another connection between the wheel-side daisy chain and the super-burly exhaust hanger.

With the stock KTM exhaust, we recommend installing at least one of the included Hot Springs Heat Shields on the top of the exhaust to prevent the Siskiyou Panniers from making direct connect with the hot pipe.

With the stock KTM exhaust, we recommend installing at least one of the included Hot Springs Heat Shields on the top of the exhaust to prevent the Siskiyou Panniers from making direct connect with the hot pipe.

With the stock KTM exhaust, we recommend installing at least one of the included Hot Springs Heat Shields on the top of the exhaust to prevent the Siskiyou Panniers from making direct connect with the hot pipe. Here on Tawzer’s bike, the aftermarket Wings exhaust runs cool enough that heat never becomes an issue, even without the Heat Shield.